How to Install Fireproofing Paint for Steel Structures in Saudi Arabia
A Step-by-Step Guide for Maximum Protection and Code Compliance
In Saudi Arabia’s demanding construction and industrial environments, fireproofing steel structures is a regulatory and safety necessity. Whether you’re building a high-rise in Riyadh, an oil refinery in Jubail, or a logistics hub in Jeddah, using certified intumescent fireproofing paint ensures your steel remains protected, your project remains compliant, and your people remain safe.
At [Your Company Name], we specialize in delivering turnkey fireproofing solutions that are fully approved by Saudi Civil Defense and tested to ASTM, UL, and EN standards.
Here’s how fireproofing paint is applied—the right way.
🔧 Step-by-Step Fireproofing Application Process
1. Surface Preparation
Proper preparation is critical for long-term performance.
-
Clean the steel surface to remove dust, grease, oil, and mill scale.
-
Apply a compatible anti-corrosive primer (zinc-rich epoxy or approved system).
-
Ensure primer is fully cured and free from contaminants.
🛠 Note: In coastal or industrial zones, abrasive blasting (SA 2.5) may be required.
2. Fireproofing Paint Selection
Choose the right fire rating and product system based on:
-
Building Code (SBC 801) requirements
-
Civil Defense regulations
-
Structural steel size and fire exposure time (1, 2, or 3 hours)
-
Environment (indoor, outdoor, industrial)
We supply and install top-rated products like Jotun SteelMaster, PPG Steelguard, Hempel, and Sherwin-Williams Firetex.
3. Application of Intumescent Coating
This is where protection begins.
-
Use airless spray machines for even application. (Brush/roller only for touch-ups.)
-
Apply the intumescent coating in layers, building up to the required dry film thickness (DFT) based on the fire rating.
-
Allow each coat to cure as per manufacturer’s guidelines (typically 6–24 hours between coats).
📏 For 2-hour protection, the DFT may range from 2mm to 5mm depending on steel size and section factor.
4. Inspection & Quality Control
Every coat must meet specifications to ensure safety.
-
DFT measurements are taken using digital gauges.
-
Adhesion, curing, and environmental conditions (humidity, temperature) are monitored.
-
QA/QC documentation is prepared for Civil Defense inspection and approval.
✅ We provide full inspection reports, datasheets, and compliance certificates.
5. Topcoat Application (If Required)
For external or exposed steel, a protective topcoat is applied:
-
Polyurethane or acrylic finishes for UV, water, and weather resistance
-
Decorative coatings for architectural aesthetics
-
Color-matched systems available upon request
🌞 Especially important in Saudi Arabia’s harsh UV and sandstorm conditions.
🚧 Where This Is Commonly Used
-
Oil & Gas Facilities (ARAMCO, SABIC, etc.)
-
High-rise Commercial & Residential Towers
-
Airports, Malls, and Stadiums
-
Industrial Warehouses & Factories
-
Data Centers, Hospitals, and Critical Infrastructure
Why Choose [Your Company Name]?
🔹 Certified Applicators with extensive Saudi market experience
🔹 Civil Defense Approved materials and application
🔹 Local project support from start to final inspection
🔹 Fast mobilization across Riyadh, Jeddah, Dammam, and remote areas
🔹 Warranty-backed installations
Ready to Fireproof Your Project in Saudi Arabia?
Don’t compromise on fire safety. With rising regulatory pressure and high-value assets at stake, partnering with an experienced, certified fireproofing provider is the smart move.
📞 Contact us today for a site survey, quotation, or technical consultation.
🛡️ Your safety is our specialty.
Keywords for SEO: fireproofing paint Saudi Arabia, intumescent coating application KSA, steel structure fire protection, 2-hour fireproof coating Saudi, Civil Defense approved fireproofing, ARAMCO fire protection standard
Would you like to turn this into a downloadable brochure or technical guide PDF for clients or consultants? I can also localize it further for Arabic-speaking audiences.
