+ 966 13 86 777 37

info@dtc. sa

Saudi Arabia

P.O Box 3412 Khobar 31952

Sat - Thu 08:00 - 05:00

Fri CLOSED

How to do Metal Roof Water Proofing?

Shed Roof Metal Painting

How to do Metal Roof Water Proofing?

Sealing the seams and painting the surface are the two mainstays of weatherproofing a metal shed roof. When putting up a metal shed roof, many people say it’s important to waterproof it right away. However, most producers of metal shed roofs also incorporate weatherproofing coatings.

Oils and other substances that are resistant to moisture can be used as a coating. These waterproofing chemicals progressively lose their effectiveness over time. This means you can put off waterproofing the roof by a few months.

Putting it off further increases the likelihood of water getting under the metal roof’s surface. This causes an issue with interior corrosion that waterproofing alone cannot fix. Learn how to seal your metal shed roof against water leaks with the help of the following tips.

Getting Started

Pick a day when the weather is expected to be dry. The process of waterproofing is best done in one sitting. The process of waterproofing might be hindered by the occurrence of intermittent rains. Additionally, when humidity levels are high, there is a chance that water will infiltrate through the coatings.

The drying process of the caulk is aided by the dry weather. Halter a ladder to the wall for safety. It’s possible that you’ll need to use extension ladders in order to reach all of the areas on the top of the metal shed.

Climb safely up a ladder and then wipe off the metal roof of the shed. Any dirt or dust present might reduce the effectiveness of the caulking. You may sweep the dust and dirt away using a broom.

Sealing the Roof of a Metal Shed

After you’ve cleaned the roof, you should check for damage such as holes. Pouring water over the surface of the shed will reveal any hidden holes. A concealed fissure can be assumed to be present if bubbles are present.

Caulking is one way to permanently close off any such cracks or gaps. When using silicone caulking, you may rest assured that the seal will be strong and impervious to moisture. Fill up all of these roof openings with caulk using the caulking gun.

The joints between metal roofing panels are difficult to fix. That’s why caulking is a must for making them watertight. Additionally, run some silicone caulk along the nail fasteners and screws of the roof’s framework and pat it into place. It’s easier for corrosion to set up at such places. Follow the curing time recommended on the caulk’s packaging.

Shed Roof Metal Painting

You should use roofing paint that is designed for that purpose. Acrylic particles in suspension form are found in metal roof coatings. These particles can form a watertight barrier by bonding to the roof’s surface.

The paint’s water resistance can be reduced if it’s diluted too much before application. Therefore, mix the roofing paint and primer as directed on the cans. Apply the first layer of weatherproof paint with the paint roller.

Generally speaking, it’s best to work from the top down while painting. For a metal roof, this entails working from the top down. This helps any surplus paint drip off as well. Manufacturers of waterproof paint may advise applying only one layer.

Nonetheless, the standard practice is to use two layers. Wait at least 24 hours for the paint to fully dry. Place a new layer of paint over any flaking areas.

About DTC

Founded in Saudi Arabia in 2004, Dorar Tammam Contracting Company (DTC) has grown to become one of the Gulf leading construction contractors.

DTC Recent Posts